Do you have so many electronic gadgets that you’re constantly tripping over wires?
Finding ways to conceal TV wires, cords, and connections for other essential appliances can be challenging, given the sheer number of wires in a modern home. Even the most tech-savvy homeowners can find themselves at a loss when confronted with a nest of cords.
But don’t despair – there are ways to keep your wires hidden and out of sight without resorting to overly complicated methods or expensive products.
Keep reading to learn how to conceal wiring in walls using some simple tips and tricks. By following our advice, you’ll be able to keep your home neat without worrying about unsightly wires getting in the way.
How To Prepare Wires For Concealment
Before you start to conceal your wires, it’s important to ensure that they are properly prepared. Any time you’re working with electrical wiring, it’s essential to take precautions and follow all safety guidelines. Once you’ve turned off the power to the area where you’ll be working, carefully inspect the exposed wires for any damage.
It’s crucial to fix any frayed or exposed cables before moving forward.
Next, pull roughly an inch of insulation off the end of each wire using wire cutters. This will allow you to build a safe connection when you connect the wires to their corresponding outlets.
Once the wires are prepped, you can start to think about how to conceal them best.
Concealing Wires Behind Baseboards
One of the simplest and most effective ways to hide wires is by running them behind baseboards. This method works well for concealing wall mounted TV wires and cords for other electronics.
① To start, identify the path that you want the electrical wires to take.
② After deciding on a path, you can use a stud finder to pinpoint the exact locations of wall studs.
③ Next, use a drill to create small holes along the path, making sure to avoid the studs. Once the holes are drilled, feed the wires through them, starting at the outlet and working your way toward your electronics.
④ Once you’ve run your wires, tape them to the wall using an electrician’s tape. So they won’t be able to shift and fall out of place.
⑤ To finish, reinstall your baseboards and enjoy your neatly concealed wiring!
Concealing Wires In Wall Cavities
Another popular method for concealing wiring is to run the wires through wall cavities. This method is a bit more involved than running the wires behind baseboards, but it can be very effective at hiding cords and wires.
① Start by locating wall studs with a stud finder. Once you’ve located the studs, you may drill holes along the route you’ve planned for the wires. Again, make sure to avoid the studs while drilling the holes.
② Then, thread the wires into the openings with the assistance of a wire snake or fish tape. Put in the plug first, then connect the device. Once you’ve run your wires, tape them to the wall using an electrician’s tape.
③ Finally, use drywall compound and mesh tape to patch up the holes. You can then paint the compounded area to blend in with the surrounding wall.
Concealing Wires In Cord Hiders
If you’re looking for a more permanent solution for concealing your wires, cord hiders are an excellent option. Cord hiders are designed to be installed along baseboards or in wall cavities, and they provide a neat and tidy solution for managing cords and wires.
① To install a cord hider, start by attaching the base of the hider to the wall using screws or adhesive strips.
② After installing the concealer, run the wires through and seal the hole.
When shopping for a cord hider, get one that’s big enough to house all your cables.
Cord hiders are an excellent way to keep your cords and wires hidden from view. They’re also relatively inexpensive and easy to install, making them a great option for anyone looking to tidy up their space.
Behind The Couch
If you’re looking for a way to hide cords and wires that are running behind your couch, there are a few different options that you can consider.
Buying a cord hider made especially for this use is one possibility. These hiders attach to the back of your couch and provide a neat and tidy solution for concealing cords and wires. You can also secure the cables and wires to the couch’s rear using Velcro cable ties.
This method is a bit more temporary, but it’s an easy way to keep your cords and wires hidden from view. Finally, you can simply tuck the electrical cords and multiple wires behind your couch.
This is the simplest approach, but it might not be the prettiest.
Under The Carpet
If you’re looking for a way to tidy up your living space, you may wonder how to hide cable ties or wires under the carpet. Even while this appears to be a difficult undertaking, it is actually pretty easy. A little time and effort are all that’s required, along with a few simple tools:
① Just grab a measuring tape to find out how much wire or cable tie you’ll need to conceal.
② Get a piece of duct tape an inch or so longer than the number you measured.
③ Remove the tape’s backing, place it flat on the floor, and press down firmly to adhere it.
④ Gently press the tv wire or hdmi cable tie into the duct tape. The adhesive will hold it in place, and the duct tape will provide a clean, finished look.
With this method, you’ll be able to keep your floors looking neat and tidy – no matter how many cables or wires you have.
Inside The Wall
If you have tried hiding tv wires or speaker wire inside the wall, you know it can be challenging.
Fortunately, you can take several approaches. Following are a few suggestions:
✅Use wire management systems: The tidiness they can bring to your wire setup is well worth the search, and you can find them at any hardware store.
✅Paint the wires: This is a great option if you want to hide tv wires but don’t want to go through the hassle of installing wire management systems. Simply paint the cables the same color as the exterior wall, and they will blend right in.
✅Use furniture to cover the cables: If you have a tv stand or other piece of furniture that covers the tv cable, use it to your advantage. Simply tuck the cables behind the furniture, and they will be out of sight.
Tubing
TV cords and power cords can be a major source of cord chaos in your home. Luckily, there is an easy way to tuck them into tubing, so they are out of sight and out of mind.
① First, head to your local home depot store and purchase some clear plastic tubing.
② Next, measure and slide tubing over the wires.
③ Once the tubing is in place, use a zip tie or other fastener to secure it in place.
④ Finally, tuck the tubing and cords behind your TV or other furniture, so they are hidden from view.
This simple project will help you regain control over the power cord chaos in your home.
Wall Cord Raceway Kit
A wall cord concealer kit can be used to hide your wires without having to make any holes in the wall if you have your TV mounted. It’s possible to safely attach this cable raceway to your wall because it often comes with an adhesive backing. Then, after the cover is snapped on, you can tuck your TV cords and other speaker cables within.
A raceway also makes it easy to rearrange or remove cables as needed. However, this may increase the distance that your cables must travel, potentially necessitating the installation of new, longer cables. This sort of raceway is typically manufactured out of plastic, making it easy to trim to size.
As a bonus, you could paint your raceway the same shade as your wall to have it fit in with the surroundings. A little paint sample taken from the concrete wall and taken to the hardware store will ensure the closest possible color match. In addition, you should use a vertical level to ensure that the racetrack is straight.
Slip Into a Drawer
Making ingenious adjustments to a desk drawer can eliminate the unsightliness of a bulky power strip on the floor and overloaded with cords.
① Make a hole in the back of the desk’s drawer closest to an electrical outlet using a hole saw bit and a power drill.
② Next, attach the power strip to the drawer panel by attaching the adhesive backing to the back of the power strip and threading the electrical wire through the hole.
③ When you plug them into the power strip, create a spot in the drawer for each charging device. This is an ideal way to keep cords organized and out of the way.
Behind Faux Books
Hiding your cords behind a bookshelf is a great way to keep them out of sight and out of mind.
What would you do, however, if you lacked a bookshelf? You can create your own faux bookshelf using some cardboard boxes and a bit of paint:
① To achieve the correct size and shape, cut the cardboard boxes. You can give them a custom color by using a paintbrush.
② Once the paint is dry, stack the boxes on top of each other and secure them together with some tape or glue.
③ Next, drill a hole.
④ Run the cords through the hole and plug them into the outlets.
This DIY project is a great way to keep your unsightly wires hidden and your home looking chic.
Cable Management Box
A cable management box is a straightforward but efficient solution for concealing and organizing wires and cables. Some models even come with built-in outlets, so you can keep all of your devices plugged in and ready to go.
Best of all, a good power cable box can help prolong your cords’ life by preventing them from getting tangled or damaged. Whether you’re dealing with a messy desk or an overflowing entertainment center, a cable management box is an easy and stylish way to get your cables under control.
Use Hooks
Using hooks to store your cords is a cheap and simple solution for keeping your space clutter-free. Small command hooks can be used to secure cords to the back of a desk or entertainment center. Larger S-hooks can be used to create a DIY tv cord hanger.
① First, take stock of all the cords in your living room. Decide which ones are essential and which can be disconnected or hidden away.
② Then, using painter’s tape, map out a plan for where you want each cord to go.
③ Once you have a plan, start attaching the hooks. For small cords, Command strips work well. For larger cables, screw-in hooks will provide a more secure hold.
Be sure to keep cords away from any heat sources and out of reach of pets or small children.
Use A Decorative Box
If you’re looking for a more stylish way to keep your cords organized, try using a decorative box. Wood or metal boxes with lids will work well. You can also use baskets or bins. The key is finding something that will fit all of your electrical cords and devices, which can be closed to conceal the mess.
① To use a decorative box for cord organization, start by plugging all of your devices into the outlets.
② Then, run the cords through the box’s lid and close it. This will assist in keeping the cords out of sight and concealed.
③ If you’re using a basket or bin, you can tuck the cords into the sides or bottom of the container. Just be sure that the lid or top of the container is secure so that the cords don’t come spilling out.
Reasons To Keep Cords Hidden
The need to conceal cords might arise for a variety of reasons.
✅To Avoid Trip Hazards
One of the main reasons to keep cords hidden is to avoid trip hazards. Exposed cords can easily be stepped on or tripped over, which can lead to falls and injuries.
✅To Prevent Damage
Another reason to keep cords hidden is to prevent damage. Exposed cords are more likely to be damaged by pets, vacuum cleaners, and other household appliances. Cords are more likely to endure longer and sustain less damage if hidden.
✅Improve The Look Of Your Home
In addition to being safer and more durable, hidden cords can also improve the look of your home. Exposed cords can be unsightly and make your home look cluttered. When cords are hidden, they’re out of sight and out of mind, which can give your home a neater appearance.
✅Save Space
Additionally, hiding cords can help you make space in your house. When cords are hidden, they’re not taking up valuable real estate on your floors, walls, or furniture. This might help you to declutter your home and give it a more spacious vibe.
✅Avoid Noise
Another benefit of hiding cords is that it can help to reduce noise. Exposed cords can hum or buzz, which can be annoying. When cords are hidden, they’re less likely to make noise.
✅Increase Safety
When cords are hidden, they’re less likely to be a fire hazard. Hidden cords are also less likely to be a temptation for small children, who may be tempted to play with them or put them in their mouths.
✅Protect Your Investment
Finally, hiding cords can help to protect your investment in electronics and appliances. When cords are hidden, pets, vacuum cleaners, and other household appliances are less likely to be damaged. Hiding cords can also help prolong your electronics’ life by preventing them from being accidentally unplugged.
Final Words
It will always require cords and wiring in every home. While it is true that they are necessary, it does not mean they have to be an eyesore. There are many ways to conceal wiring in walls, and the seven reasons above show why it is important. Not only will it improve the appearance of your home, but it will also make it a safer and more comfortable place to live in.
So the next time you are looking for ways to organize your home, don’t forget to consider hiding your cords and wiring. Whether you use cord covers, decorative boxes, or another method, hiding cords can help you enjoy a safer, more organized home.