This article provides instructions for how to connect airpods to HP laptop. You can even connect your AirPods to your HP laptop while they are also linked to your iPhone, and swap between the two whenever you choose.
How To Connect AirPods To HP Laptop?
AirPods connect via Bluetooth; hence, connecting AirPods to an HP laptop requires turning on Bluetooth, entering pairing mode, and then connecting the AirPods. Once configured, your AirPods will automatically reconnect when within range. You can also connect and disconnect them manually.
If you know how to use Bluetooth devices, this guide will be easy for you to understand. To connect your AirPods to an HP laptop, do the following:
Step 1: Prepare Your AirPods.
Ensure your AirPods are completely charged. Replace them in the charger until they are fully charged.
Note: AirPods require roughly twenty minutes to completely charge. AirPods charging cases require around one hour to fully charge. Cases that are fully charged can contain up to three or four AirPods charges.
Step 2: Configure Audio Input On Your HP Laptop.
Switch from Speaker to Headphone mode to pair with a Bluetooth device:
Open the Sound Settings window. Click the speaker icon on your Windows taskbar.
Choose AirPods as the default audio device by selecting Headphones in the selection menu.
Note: If your HP laptop immediately switched to an available audio output when a Bluetooth device was connected, you can skip this step and proceed to Step 3.
Step 3: Turn On Bluetooth On Your HP Laptop.
To open the Action center, hit Windows + A on your keyboard simultaneously. Select Bluetooth.
Otherwise, you can open settings by pressing Windows + I simultaneously. Choose Devices followed by Bluetooth and other devices. Bluetooth must be enabled on your laptop. Select Bluetooth from the menu that appears after clicking Add Bluetooth & other device.
Step 4: Put Your AirPods In Pairing Mode.
Take the AirPods out of the charging case. Press and hold the button located on the rear of the AirPods charging case until the signal light on the case turns white and begins blinking. This puts the AirPods into pairing mode.
Step 5: Pair Your AirPods With Your HP Laptop.
Return to the display of your laptop. The list of discovered Bluetooth devices should include your AirPods. Place the AirPods in your ears, select the AirPods from the Bluetooth list, and then link the devices. After successfully connecting your AirPods to your HP laptop, you should hear a beep.
How To Use AirPods With an HP Laptop
Connecting AirPods to an HP laptop is different than using AirPods with the laptop. After connecting the AirPods, you will need to switch audio outputs if you wish to listen to music or videos, engage in video chat, or do anything else. This may occur automatically the first time your AirPods connect, but you can also do it manually if your AirPods are not producing music.
Your laptop may have various audio options if you’ve previously connected multiple devices, however an HP laptop will display Speaker / Headphone (Realtek(R) Audio) at the very least. You can utilize your AirPods with your laptop by switching from this output to your AirPods.
Here’s how to connect AirPods to an HP laptop:
- Remove your AirPods from their case.
- Select the speaker icon from the taskbar.
- Click the dropdown menu .
- Select Headphones (AirPods Stereo) from the menu.
- AirPods are now compatible with your laptop.
Can AirPods Be Used With Laptops
AirPods are compatible with any device that can connect to an audio output or input device via Bluetooth. This indicates that AirPods are compatible with laptops that support Bluetooth. Before you can connect your AirPods to your laptop, you must add a Bluetooth dongle if it lacks Bluetooth.
Given that all recent HP computers include Bluetooth, AirPods can be used with an HP laptop in the same manner as other Bluetooth earbuds, headphones, and headsets.
Why Am I Unable To Pair My AirPods With My HP Laptop?
If your AirPods won’t connect, it could be a Bluetooth issue on your laptop or an issue with the AirPods themselves. Here are some frequent issues and their solutions:
Bluetooth is not turned on:
Bluetooth must be enabled on your laptop. Try disabling Bluetooth and then reenabling it with your AirPods case closed. Then, take the AirPods from their case and test their connectivity.
Bluetooth driver out of date:
If your Bluetooth driver is out of date, you may experience connection issues with AirPods. Update your drivers and retry.
Can’t connect via Bluetooth:
Determine if any other Bluetooth headphones function. If they do not, Bluetooth may not be functioning on your laptop. Fix your Bluetooth issue and then retry.
Disconnected AirPods:
The AirPods case’s white light must be blinking in order to establish a connection for the first time. If your AirPods aren’t pairing properly, you can try a few different things to get them working again. Put your AirPods into pairing mode and give it another shot.
AirPods connected but not enabled:
However, even if your AirPods are connected, they may not be set as the default playback device. If you’re still having trouble after following the steps above, access the system’s Sound Control Panel and make headphones (AirPods Pro Stereo) the primary sound output device.
How To Disconnect AirPods
If you continue to have trouble connecting your AirPods to an HP laptop, PC, or other computer, you may need to disconnect them from your iPhone, iPad, and other devices. If you use your AirPods with many devices, they have likely gotten overwhelmed due to the amount of connections they have established. AirPods may cease pairing if they are linked to an excessive number of devices.
The most effective way to ensure that your AirPods are functioning properly is to disable Bluetooth on all of your other devices. If you regularly pair your AirPods with your phone, consider short disabling Bluetooth on your device. By eliminating signal interference, disabling Bluetooth on your phone will assist your AirPods connect to your computer. Repeat the process with each additional device until your AirPods connect successfully.
Here’s how you disconnect AirPods from your iPhone or iPad.
- Launch the Settings program.
- Turn Bluetooth on.
- Tap the “I” icon alongside your AirPods in the Devices list.
- Select Forget This Device from the drop-down menu.
- To confirm, press Forget Device in the confirmation dialog box.
Final Words
You can connect your AirPods or AirPods Pro to your HP laptop using Bluetooth in the same manner as you would with any other Bluetooth-enabled device. When you place the AirPods charging case in pairing mode, just enter “Settings,” select “Bluetooth,” and add a new device.
Keep this in mind while connecting AirPods to an HP laptop, as you will not receive all the advanced capabilities that Apple products offer. Also, ensure that your Bluetooth drivers are up-to-date and that you have set your Output device if you’re having trouble connecting AirPods to your laptop.
This article provides information on how to connect AirPods to an HP laptop. In that case, why not read some of our related article like How To Connect AirPods To Dell Laptop?. It contains a great deal of information.