Tired of those unsightly scratches from toilet bowl? Nobody likes having scratches on their toilet bowl. It can make the whole bathroom look dirty and dingy. Not to mention, it’s just not sanitary.
This post covers the topic of how to remove scratches from a toilet bowl using different methods.
How to Remove Scratches from Toilet Bowl
You frequently get scratches within the toilet bowl after using a plumbing snake to eliminate clogs. While a plunger is gentler, it still can cause some scratches. If toilet bowls had gotten scratched, don’t fret! There are a few ways that you can remove them and get your toilet to look shiny and new again. Below is the step-by-step guide that you can follow:
- The water supply must be turned off as your first action. Thus, no further water will be able to worsen the toilet bowl’s damage.
- Once you’ve turned off the water, you can flush the toilet to drain all of the water out of the bowl.
- To repair the damaged area, clear it of any extra debris or debris.
- Apply a denture tablet to the scratch and allow it to rest for a while.
- Next, you’ll need to scrub the scratches with a toilet brush. Make careful to apply some pressure equally and in circular movements.
- To get rid of the scrapes, utilize a toothbrush or other scrubbing equipment.
- Dry the area after rinsing it along with water
- To protect the surface from further scratches, use a sealant.
Different Methods to Use
Aside from the method that we’ve mentioned above, there are other ways that you can remove scratches from your toilet bowl, and here are some of them:
1, Pumice Stones
Pumice stones are a natural product that might be used to eliminate flaws from any type of surface safely. Just wet the stone and rub it gently over the scratched area. The abrasive nature of the pumice would aid in removing the scrape without causing any damage to the nearby areas. Follow up with a good quality toilet cleaner or polish for best results.
2. Acid Cleanser Powder
If your toilet bowl looks a little worse for wear, you may consider using an acid cleanser to remove the scratches. While this can be an effective method for restoring the bowl to its original condition, there are a few things you should keep in mind before you get started.
- First, always use gloves and eye protection when working with acid cleaners.
- After cleaning, be sure to properly wash the bowl to get rid of any cleaner residue.
- Avoid using acid cleansers on porous surfaces such as marble or granite, as they can damage the finish.
3. Vinegar
The vinegar’s acetic acid helps break down the build-up that causes scratches, making them much easier to remove. Simply apply vinegar to a soft cloth then apply it to the impacted areas. After a few minutes, the scratches should begin to disappear. For best results, be sure to use distilled white vinegar, as other types of vinegar may not be as effective.
4. Baking Soda
Just dump the soda into toilet bowls and leave it there for a while. The soda’s acidic content will dissolve those scratches, leaving them much simpler to remove. After you managed to get rid of the scratches, rinse the toilet bowl with water to remove any residual soda.
5. Drywall Sandpaper
This sandpaper is intended to be used only on drywall surfaces, such as walls. It is essential to use drywall sandpaper because it is much finer than regular sandpaper and will not damage the toilet bowl. In addition, it is crucial to use a very light touch when sanding so that the scratches are not made worse. Once the surface has been sanded with drywall sandpaper, it should be wiped clean with a damp cloth.
6. Acrylic Latex Primer
If your toilet bowl looks a little worse for wear, you may wonder how to remove scratches. Fortunately, there is no need to buy a new toilet bowl – you can easily remove scratches with an acrylic latex primer. Just follow these simple steps:
- Clean the area around the scratch with mild detergent and a soft cloth.
- By using either a cotton swab or a brush, put the primer towards the scrape.
- Give the primer at least twenty – four hours to cure.
- After the primer has dried, use delicate sandpaper to remove the scratch from the surrounding surface.
- Finish by polishing the area with a soft cloth.
7. Epoxy Paint
Epoxy paint is a type of resin that dries hard and is durable. It can be applied directly to the scratch and will bond with the porcelain to fill in the damage. Once the epoxy paint has dried, it can be sanded smooth and then repainted to match the surrounding area. Be sure to follow the manufacturer’s instructions carefully when using epoxy paint, as it can be toxic if inhaled or ingested.
8. Porcelain
Luckily, there is a simple and inexpensive way to remove scratches from your toilet bowl using nothing more than a piece of porcelain. Before you begin, cleaning the area around the scratch is essential and ensuring it is free of dirt and debris. Once you’ve done that, simply rub the piece of porcelain over the scratch in a circular motion. The porcelain will act like fine sandpaper and gradually remove the scratch. In order to thoroughly eliminate the damage, you’ll probably have to repeat the procedure multiple times.
9. Soldering Flux
This material is designed to flow easily and bond quickly to metal surfaces. As a result, it can help to fill in scratches and smooth out the surface of the toilet bowl. In addition, soldering flux is highly water-resistant, so cleanings will not easily remove it.
In order to use soldering flux to remove scratches from toilet bowls, apply it to the affected area and allow it to dry. Once dry, the flux will have formed a protective barrier over the scratch, helping to keep it from further damage.
Tips to Prevent Scratches
Now that you know how to remove scratches from toilet bowls, it’s time to focus on preventing them in the first place. Here are a few tips to help you keep your toilet bowl looking like new:
- Use a soft cloth or sponge when cleaning the bowl, as abrasive materials can cause scratching.
- Don’t use strong chemicals since they may harm the bowls.
- Be careful when placing objects in the bowl, as they can scratch the surface.
- Use a toilet brush with soft bristles to avoid scratching the bowl when cleaning.
Final Words
Scratches from toilet bowls are inevitable. Over time, even the most well-maintained bowl will succumb to the wear and tear of daily use.
However, by following the tips in this blog post, you can remove scratches from your toilet bowl without damaging it. You can maintain the appearance of your toilet bowl by investing a little effort and patience.